Single-Serve Packaging

Stick Pack Machine Manufacturer for Powder, Liquid & Granule Filling

Updated October 2026

A dosing method or pack format that does not suit the product can disrupt filling and sealing. Choose multi-lane stick packaging equipment around your powder, liquid or granules, dose and finished pack.

Discuss Your Application

Find a Stick Pack Machine for Your Product

Powder Stick Pack Machines

Coffee, collagen and powdered drink mixes. Start with the powder's flow and your target dose.

Powder Stick Pack Machines

Liquid dosing nozzles on a multi-lane stick pack machine

Liquid Stick Pack Machines

Energy gels and liquid products. Match the pump and nozzle to viscosity and filling temperature.

Liquid Stick Pack Machines

Multi-lane packaging machines in the assembly workshop

Granule Stick Pack Machines

Granulated drink mixes and small-dose products. Confirm flow, particle size and the required sachet format.

Granule Stick Pack Machines

Multi-lane Stick Packaging, Built Around Your Dose

A multi-lane stick pack machine forms, fills, seals and cuts several packs in each cycle. The right configuration starts with the product you want to pack.

We manufacture three types, each built around one dosing method: powder stick pack machines with an auger for every lane, liquid and gel stick pack machines with a pump for every lane, and granule stick pack machines with volumetric cups or vibratory feeding. The product decides the type; lane count and pack size are set for your project.

Buyers also call this equipment a stick packaging machine, stick pack filling machine, stick filler, stick sachet machine or stick pouch machine. Stick sachet and stick pouch usually describe the same slim, back-seal pack. A wider sachet sealed on four sides is a different format with its own forming and sealing parts, so name the format you need in your brief.

Compare lane count, dosing method and pack dimensions together; our stick packaging machine comparison sets the three machine types side by side. Output depends on the material, fill weight, film and sealing conditions.

Not sure how many lanes to specify? Read single vs multi-lane stick pack machines and how a stick pack machine works.

As a four-lane reference, a powder machine runs about 120–160 sticks per minute, and liquid and granule machines roughly 120–200 packs per minute. The product, dose, film and pack length determine the operating rate. Confirm the selected configuration in a sample trial and record its output in the quotation.

Discuss this configuration

Discuss on WhatsApp

Four-lane powder packaging machine with hopper and control panel

Your Product Sets the Filling Method

Fine powder, a viscous gel and a free-flowing granule behave differently at the filling point. We start with those differences when discussing a machine.

For powder applications such as coffee stick packs and collagen, an auger filling arrangement is one option. For liquids and gels such as energy gel stick packs, the pump and nozzle must suit the product's flow and temperature.

Browse all stick pack machine applications for coffee, nutraceutical, protein powder and energy gel projects.

Explore the Machine Types

Start With a Product Sample

Tell us what you are packing, the dose per pack, the pack dimensions and the output you need. Include film details if you already have a packaging specification.

Ask about a stick pack machine sample trial to assess filling behavior, seal quality and pack appearance before agreeing on a configuration. Trial scope and arrangements are confirmed for each project.

Start the equipment comparison with the material: powders use augers, liquids and gels use pumps, and granules are assessed for volumetric cups or vibratory feeding.

If the film specification is not ready, send the product, dose and candidate pack size and mark film details as open questions. Use the quotation brief to record what is known.

For a single-machine order, send the same application brief as for a larger project; name the equipment and support you want included.

Discuss Sample Testing

Small-Pack Details That Change the Machine

A stick pack is a slim single-serve format. A wider sachet may be a better fit for another dose or application; stick pack vs sachet compares the two. Pack width, length and seal layout must match the selected machine, so check the stick pack sizes and dimensions first.

Share your film structure, artwork and opening requirements. Check sealing conditions and cutting arrangements against the actual material.

Name the options in your brief: a straight, zig-zag or round-corner cut, with an optional tear notch or chain of perforated sticks. Dust extraction and nitrogen flushing are options on the powder machine, and a heated, agitated hopper is an option for viscous liquids.

Discuss Your Pack Format

Multiple filling lanes and film-forming sections inside a packaging machine

Four Details to Share With Us

1Product & Material — Material Sheet

2Dose Range — Min / Max in g or ml

3Pack & Film — Drawing PDF

4Accepted Output — Packs / Minute

Talk About Your Packaging Project

Bring your product requirements to a team focused on packaging machinery. We can discuss the filling method, machine configuration and the next steps for evaluating your application. Our manufacturing base is in Foshan, Guangdong Province, China, and we have been building packaging machinery since 2013.

Every stick pack machine we sell is built to order, and single-machine orders are quoted the same way as larger projects. A project runs in this order: your brief, a review of the filling method and pack format, a sample trial where your product's behavior is the open question, a written quotation that states the configuration and acceptance criteria, a factory acceptance test against those criteria, then delivery, installation and training as agreed.

For factories and brand owners in the United States and other markets, tell us the voltage and frequency at your site; the electrical supply is matched to the destination grid and stated in the quotation.

Ask about changeover, cleaning, spare parts and installation support as part of your quotation. Scope, timing and delivery terms are agreed for each project; see sample testing, installation and training and spare and change parts. Read what drives the stick pack machine price before you request a quotation, and use the request a quote page to prepare your brief.

If your market needs specific compliance documents, ask us for the ones that apply to your configuration when you request the quotation.

What to send us
Item	Why we need it	Example format
Product / material	Identify the material and filling route.	Product: ___; material specification (PDF)
Dose range	Define the portion and adjustment range.	Minimum: ___; maximum: ___; unit: g or ml
Pack drawing	Review dimensions and seal layout.	Dimensioned drawing (PDF); revision: ___
Film specification	Check the film against forming and sealing requirements.	Film supplier specification (PDF); revision: ___
Accepted output	Define useful output and the working pattern.	Accepted packs/min: ___; shifts: ___

Send the details below to discuss the configuration and any missing information. Note any undecided parameters as open items, and agree how to share samples and documents on WhatsApp.

Our team reviews the product, pack and output requirements with you.

Discuss on WhatsApp